"replaced thermal fuse, tested okay."

replaced upper and lower front supports. tested ok

timer failed. visibly burnt motor contacts.

water overflowing from house drain when washer drains.

belt broke due to failed belt tensioner. installed maintenence kit with all wearing parts.

"replaced failed condenser fan motor."

replaced bake ignitor under warranty

"Installed boot, tests OK

Not the correct part.

wrong UIS linked; saved tckt

no electricity. need to reschedule; saved tckt

wrong UIS linked; saved tckt

"removed piece of plastic from disposal. if anymore trouble, would need to replace disposal.

rescheduling; schdld next appmnt for 12/14 WED !

going on wednesday; schdld next appmnt for 12/14 WED !

going on tomorrow; schdld next appmnt for 12/13 TUE !

Bad control board.; ordrd 1 W11202746 (cntrl-elec)

"Installed icemaker, tests OK"

"gear case failure. basket still floating, but no agitation. just makes a grinding sound. will also need wash plate, as current plate will break during removal. will need p#W11454734 $262.48 and p#W10752283 $116.82 total after $169.95 labor will be $691.44"

"installed listed parts, manually defrosted. tested okay."

LE code. told them to call LG for help.

"tightened power cord, tested okay."

this was actually the door bell. fixed it by just pressing button. we cant actually repair this peramantly though

"ran 2 rinse cycles, found no leaks at dishwasher, or evidence of a leak. only found water spraying out of airgap. cleaned and adjusted hose,but will need plumber to correct this permanantly. its too long, narrow and looped around disposal. i also adjusted feet to raise front of dishwasher. also possible the dishes were loaded in a way that water deflected and splashed out through door. no cracked spray arms, will need to use as normal. only other issue im finding with dishwasher is a loud drain pump thats probably going to fail soon. would need p#A00126401 $105.11 unit would need to be uninstalled to make repair. total after $139.95 labor would be $419.52 if this unit ever has drain problems in the future, we would just order this part and bring it with us."

"WH38X10021 bearing retainer assembly, unavailable from supplier. Customer is ordering part from ebay, will call the office once part arrives. No warranty on parts provided by the customer. $150 to install the part."

Got my box

"Installed thermostat, tests OK, give 24 hours for proper temps."

"Installed hoses, inlet, gasket, and nut. Tests OK"

"Door boot is leaking. If lengthy problem persists, replace control board.; ordrd 1 00667489 (Washer door boot)"

magnetron failed due to normal wear. replaced magnetron. microwave heating now

replaced timer. tested ok

"repaired wiring from rear, and repalced owner provided hinges for lower door, tested okay."

"LE code, draining fine, and not overfilling. this is a nearly unrepairable error code. no restriction in tub, no broken wires at sensors. unit will need rotor p#AHL72914401 sensor is NLA , wiring harness p#EAD62037014 is NLA, and main controller p#EBR80360704. even after replacing every related part, this is an error code we cant gaurentee a repair for. there is a chance these parts fix nothing, and we cant return parts. only parts that are still available would be over would be $1152.28. again, with no gaurentee. unadvisable to attempt repairs."

"compressor failure. zero cooling. only option would be calling manufacturer for assistance with this sealed system repair, but at this age, they will only offer to sell a new unit."

"2 Glide; ordrd 2 306508 (bearing,glide front)s and 2 12001541 (bearing & roller asy)s and 1 WP6-3700340 (bearing)"

"2 Glides; ordrd 2 306508 (bearing,glide front)s and 1 WP6-3700340 (bearing) and 2 WP33001807 (seal)s"

"Bearing:, Needs new rear bearing.; ordrd 1 5303281153 (bearing kit-rear)"

"Installed valve, tests OK"

Needs control panel. Part has no eta from marcone.; ordrd 1 WB56X28525 (control panel and fr)

leak is not from drain pump. researching; schdld next appmnt for 12/8 THU !

no power out to upper oven bake element. replaced relay board. oven tested ok to 350.

"installed maintenance kit and replaced gas valve coils(wearing part). tested ok; used 1 4392067 (MAINT KIT), and 1 5303931775 (COIL KIT) from stock"

"ordering defrost timer, and warranting thermostat. will sell timer at cost, no additional labor for install. defrost part price is 42.49. after tax will be $46.21; ordrd 1 215846604 (timer-defrost) and 1 241537103 (thermostat)"

"door pin wasnt aligned, realigned by heating up the ruber, tested okay. but possible this happens again, but they dont make parts for this machine."

"unit needs drain pump p#WD26X10049 - need autho; saved tckt , states that autho needed"

"this compressor sounds like a 2 stroke engine. replacement only option. will need p#482982 which is NLA, subs over to p#W10619807 which is also discontinued. the compressor we installed 20 years ago is also NLA. if we can find compressor for this, guessing total will be approx $850-$1250"

"vent clogged. cleaned out by blowing from inside, removed large wad of lint. tested okay."

Dryer tests OK

"6871EC1116A, Part is discontinued, customer is going to order part and will call the office when the part arrives. No warranty provided on parts provided by the customer."

Signs of leaking found on inlet. ordrd 1 WPW10213825 (nut-tube) and 1 WP8531323 (gasket) and 1 WPW10195536 (water inlet port) and 1 WPW10545278 (drain hose) and 1 W10878507 (inlet tubing)

Needs new valve.; ordrd 1 AJU73213301 (Valve)

LG oven relay board failed. will need to replace burner rings after disassembling. parts should take 2-4 days.; ordrd 1 DE81-08448A (relay board) and 6 DE81-07824A (ring)s

replaced lid assembly. washer tested ok but multiple hose connections leaking. installed new hoses on full size washer but left mini washer disconnected. need another set of hoses and Y connectors.; ordrd 2 41025 (hose kit)s

replaced door latch. tested ok

dishwasher doesn't fit well in cabinet. consoe has been hitting upper mounting bolts had enough that it is keeping the door switch from engaging. removed bolts. dishwasher works fine but no alternative way to mount. put a couple screws behing the kick panel under dishwasher but is still a little loose.

"installed listed part, tested okay."

"defrost heater p#WR51X10055 , will also need limit p#WR50X10068. will ned to manually defrost. total after; used 1 wr60x from stock, ordrd 1 wr51x10055 (heater) and 1 wr50x10068 (limit)"

"installed listed part, tested okay."

"bake element failure, and wiring connectors will need to be rebuilt. unit needs p#WPY04100021; ordrd 1 WPY04100021 (elem)"

"replaced infinite switch. tested okay.; used 1 5303935086 (SWITCH, INFINITE) from stock"

"vent clogged. brushed, but still 100% clogged, was able to reach vent from crawl space and dump out lint. tested okay."

"unit at 32 in fridge, 32 in freezer.. found unit off at time of service, turned thermostat to max, and unit didnt turn on, tried hand starting fan, no change, until i started to pull evap cover, unit started up. full frost pattern on evap as well.. doing some research on this;"

picked up core.

"LG linear unit, didnt even look at this. she will have to call sears for assistance."

"installed listed part, tested okay."