Found dryer vent misaligned. Corrected dryer position. Dryers will not heat properly if they are drawing in their own exhaust while running. Hopefully this makes a noticeable difference. Dryer tested okay otherwise. Vent is short enough that it can't really get clogged. Dryer heats within proper temp range. Recommend timed cycle. Most fabrics should dry within 50-70 minutes.

Unit has been defrosting, but overcooling due to thermistor reading 72 degrees. Defrosted, installed new thermistor, verified correct temperatures. Use as normal.

Error codes: 203 for 5 abnormal freezer defrosts, 102 for freezer fan unable to reach target speed, 304 for freezer above 72 degrees, and fault code 300 which is "NA." These are all related to a no defrost scenario occurring in the freezer again. Freezer evaporator thermistor test is reading 71.46 degrees; this is clearly a problem as the freezer is approximately 22 degrees in reality. It will not defrost if it thinks the freezer is 72 degrees. Will need thermistor p#WR55X10025; will install and manually defrost at no charge; ordered 1 WR55X10025.

Installed listed parts, after full manual defrost. tested okay.

Installed listed part, tested okay. Unit immediatly filled. Allow 24 hours for normal ice production.